Tips & Tricks

How to Fix Driver Power State Failure

How to Fix Driver Power State Failure

How to Fix Driver Power State Failure

Windows is a great operating system, but sometimes it can cause trouble. A “blue screen error” is one of the most scary problems that can happen, but it is also very common. It tells you that your system has crashed and gives you an error code to help you figure out what’s wrong. If you’re facing such driver power state failure problems, you’re on the right path to gathering the guideline knowledge you need to fix the driver power state failure.

One of the reasons BSODs occur is when the driver’s power state fails. It has to do with the stop code 0x0000009F most of the time. The stop code for driver power state failure means that the power state of the driver has become inaccurate or irregular.

A common problem that Windows users may run into is the “Driver Power State Failure” error. This error usually happens when the running system of the computer has trouble with device drivers or power management. Understanding what caused this mistake and looking into possible fixes can help users troubleshoot and fix the problem. In this article, we’ll talk about ‘driver power state failure’ in terms that are easy to understand and are backed up by study.

Driver power state failure could happen when your computer goes to sleep or wakes up. It could also happen when you turn your computer on or off. You may think of the following picture when it happens:

Driver power state failure

What does the error "Driver Power State Failure" mean?

The “Driver Power State Failure” error is a blue screen error (BSOD) that happens when a device driver in your system has a problem while switching between power states. Power states are the different ways that computers can be used, like sleeping, hibernating, or being used. This error can happen when a driver doesn’t react or moves between power states in the wrong way.

Reasons of "Driver Power State Failure":

  • Outdated or incompatible drivers: If drivers and the operating system don’t work well together, the power state can fail. To make sure your device drivers are compatible with system changes, it is important to keep them up-to-date.
  • Power Management Problems:  Driver-related errors can be caused by the wrong choices for power management or conflicts in the power management system. These problems can happen because the software isn’t compatible, the settings are wrong, or the hardware is old.
  • Hardware Incompatibilities: Some hardware parts, like graphics cards or network connections, may not work well with the system, which can cause driver failures and this error.
  • Problematic System Updates: Sometimes, system updates can add bugs or problems that stop device drivers from working properly. This can cause the power state to fail.

The error message “power drive state failure” is unusual. The failure of particular drivers is a common source of these types of issues. The most important ones are:

Newly installed drivers that are incompatible with Windows. This issue may appear when Windows is restarted after being left in sleep mode. Power fluctuations. Power outages and shutdowns at random. Dangerous software like viruses and malware.

The Blue Screen of Death mistake usually shows up when something in the system is preventing Windows from working. As a result, the PC restarts on its own. The blue screen can be caused by a number of errors, and the exact error is always written at the bottom of the screen. Inappropriate drivers for any computer device are frequently the cause of the BSOD message “Driver Power State Failure.” So, if you are getting the same error, read this guide. I have written about some of the methods you can try “How to Fix Driver Power State Failure” this problem.

Way 1: Restart your computer.

It’s possible that a simple restart is all that’s needed to fix any transient issues or conflicts that are creating the error. Make sure that your computer has been completely powered down before turning it back on again.

Way 2: Update Device Driver

You may face this problem due to faulty or outdated graphics drivers or WiFi. It is needed to update both of these drivers to solve the driver power state failure problem.

  1. Go to control panel and and find hardware and sound
control panel

2.Then, click on device and printer and select to open device manager 

3. Go to device manager, expand display adapter and press on the graphic card driver and choose update driver

update driver

4. Right now, select “Search automatically for drivers”.

Search automatically for drivers

5. Do end the process. Once the process is complete, restart your personal computer and review whether the error has been resolved.

Way 3: Remove external hardware

Is a malfunctioning or corrupted driver for a peripheral device likely to blame for the excessive CPU usage? Disconnecting your devices from the mains may help. This can help you identify any malfunctioning parts. The blue screen error and driver power state failure could be the result of a malfunctioning component. By turning off each of your peripherals one at a time, you can pinpoint the problem’s origin. Then you’ll know if the peripherals or their drivers are at fault.

Slowly turn off each accessory. Verify if the blue screen of death stays on during the operation. The drivers, or in some cases, the hardware itself, may need to be updated if the issue persists after removing a particular device or set of devices.

Way 4: Uninstall irrelevant third party device driver

It’s also possible that the ‘Driver Power State Failure’ error was brought on by one of the system’s third-party drivers. This issue may appear if you have recently installed a third-party driver programme that is either faulty or incompatible with your system or hardware. Follow these steps to remove the driver:

  1. Find Device Manager, select the category of the device for which you have installed the driver. 
  2. Right click on the unnecessary drive and do Uninstall device.
  3. You can follow according inserted picture to proceed
Device Manager

4. After uninstalling the diver, restart your system to see if you have resolved the problems.

Way 5:Open the Power Troubleshooter

If you’re using a laptop, you may often have issues with the power. If your computer sees driver power state failure after being woken up from sleep mode, there are more chances that your PC has an issue with power. You can use the troubleshooter to fix the issue. Please follow the guidelines

  • Hit Windows+I on the keyboard to run windows settings.
  • Search for Troubleshoot. 
  • Click on Additional Troubleshooter
  • From list, you should run the troubleshooter for “POWER”
  • You should follow the tips on your screen. Once the process is done, restart your your computer.

Way 6: Scan And Fix Error System Files

Windows inconspicuous System File Checker (SFC) can detect problems like driver power state failure and fix them for you.

  1. Open windows for bringing up Command Prompt on your computer by searching for ‘cmd’ in the windows search box. It should be run as an administrator .
  2. When the Command Prompt is set up, type ‘SFC’ and click enter. Right now the SFC will scan your pc for possible errors. End up the window and restart your computer when the scan is fully completed. 

Way 7: Improve your power settings

Obsolete power settings may also be the reason for the driver power state failure error. You can disable specific power settings to solve it. We put here guidelines to be followed.

  1. Open Control Panel, select Hardware and Sound then power options
power options

2. From the left side, go to  ‘Choose what the power button does’.

Choose what the power button does

3. Following that, choose ‘Change settings that are currently unavailable’.

Change settings that are currently unavailable

4. Then, uncheck the boxes for “Turn off fast startup” (recommended), “Sleep,” and Hibernate options

Turn off fast startup

5. Finally, click on ‘Save changes’ and after completing the whole guideline, restart your system to review whether the error is fixed.

Way 7: Go for uninstall newly added programs or updates

If your Windows faces errors after recently installing a new program or an update, you may try uninstalling it to check if this error will be fixed.

Here is the steps for uninstalling programs and updates

  • Go to the control panel.
  • Select programs from the left corner
Select programs
  • Click on the programs and features 
  • From view installed updates you can uninstall updates.
uninstall updates

Way 7: Reset window for factory settings

If you’ve tried everything and you’re still getting the same problem, resetting the PC is your last available option. To do so, follow these steps:

  • Type Windows+I to open the settings and go to the update and security function.
update and security function
  • Following that, go to the “Recovery” option from the left side menu, then hit on the “Get Started” option under the “Reset this PC” option:
Reset this PC
  • After that, click on the “Remove Everything” option, and your PC will start to reset.

Without any doubt, this will fix whatever is wrong.

If you’re having trouble with your computer, try one of the solutions above. Make sure you update your drivers and power management software if you find yourself frequently putting your computer to sleep. To take advantage of helpful options like the scan schedule that lets you check for updates at preset intervals, download and install the Advanced Driver Updater. 

If you still get the Driver Power State Failure error after taking these steps, you may want to look for more help on Microsoft’s support boards or talk to a professional technician who can give you advice based on how your system is set up.

This is the final sentence of the post. I really hope this post on the topic will be of some use to you. If you have any questions or comments, please let us know below. 

Leave a Reply